Sale In Outlet Wells A02453 Seat Heater Switch Discount Wholesale Online
Spot Welder Battery Spot Welder DIY Portable Mini Spot Welder In Sale In Outlet Wells A02453 Seat Heater Switch Discount Wholesale Online Tools Home Improvement => Welding Soldering => Welding Equipment the individuals behind my story remain true to the company's roots Wells A02453 Seat Heater Switch Online UK Sale Promotion
This fits your .
Make sure this fits
by entering your model number.
❤This machine is equipped with 3.7V, 5.5AH lithium battery. After the single-chip microcomputer detects that the soldering pen touches the nickel sheet, it controls the "MOS" to turn on. Since the resistance of the soldering pen contacting the nickel sheet is much greater than that of other parts of the loop, most of the energy is concentrated here. The way of heating, the nickel sheet is melted, and the nickel sheet is welded to the battery
❤Too much pressure or too little force during welding will result in weak solder joints. (Too much strength may cause damage to the nickel sheet. If the strength is too small, the contact resistance of the nickel sheet is too small, and the heat generated is not enough, and the nickel sheet does not melt. There should not be a lot of sparks during welding.)
❤Instructions for use:1. Long press for 3 seconds, the buzzer will sound once, turn on/off.2. Short press the button, the buzzer will sound once, and the gears will be changed. Each press will increase by one gear. 1-6-1 cycles. The 6th gear has the strongest welding strength. Observe the light after pressing the key. The light flashes several times in several gears.3. After the welding pen is pressed, the buzzer will sound and wait for about 1 second to trigger welding
❤4. When charging, the button light will remind in the form of breathing light, and the light will always be on when it is full. To prevent accidents during charging, the welding function is not available during charging
❤5. If it does not work after working for a period of time, it may be that the power is too low, which causes the MCU to not work, the charging light does not light, and it does not turn on. At this time, it will be charged for half an hour and the voltage can be restored after the voltage rises. 6. Comes with a 50C discharge high-rate lithium battery, which is fully charged with hundreds of solder joints with common nickel-plated sheets within 0.1mm-0.15mm
Pulse time: six gears adjustable (1-6-1 gear cycle, 6 gears maximum)
Trigger delay: 0.8 seconds
Adapted charger: 5V, current＞1A
Nickel sheet: 0.1mm-0.15mm
1. After receiving the product, please charge it fully before using it to get the best results.
2. This machine can weld 0.1-0.15mm nickel steel sheet and 0.1 pure nickel sheet. It is not to weld pure copper materials with strong conductivity.
3. When the product is not used for a long time, the battery power should not be kept too low or too high.
4. If the power consumption is too low, the machine will not work and the charging light will not turn on. When this happens, please charge it, and it will recover after tens of minutes.
5. Current, voltage, and materials can affect the spot welding effect. Not all materials can get a good spot welding effect. What can now be adjusted is the spot welding time and contact strength. It is recommended to practice hands with iron cans first, and then solder the battery after getting familiar with the welding machine.
6. The product is equipped with a charging cable and no charger head. Please use a charging head with a fixed 5V output for charging. Do not use a fast charging head, otherwise the battery may be damaged.
1*Integrated welding machine
1*High-rate lithium battery
1*welding pen + 10AWG silicone wire
Fast Delivery amp;Risk-free Online Shopping: USA STOCK. Arrive within 3-7 days after shipment.Your satisfaction is our top priority. If you have a problem with a transaction, Just let us know and MONIPA will work with you to resolve the issue