High order 1 oz Seeds (Approx 31234 Seeds) of Physocarpus opulifolius, East Cheap Retail Store

1 oz Seeds (Approx 31234 Seeds) of Physocarpus opulifolius, East
1 oz Seeds (Approx 31234 Seeds) of Physocarpus opulifolius, East


Product description

You will get 1 packet contains 1 oz Seeds (Approx 31234 Seeds) of Physocarpus opulifolius, Eastern Ninebark, Atlantic Ninebark.

High order 1 oz Seeds (Approx 31234 Seeds) of Physocarpus opulifolius, East Cheap Retail Store

This fits your . Make sure this fits by entering your model number. ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools Precision ground copper tips are plated with iron, nickel and chromium ST7 - .031" / 0.79 mm diameter Conical tip Tinned with Lead Free alloy Product description Weller has been the leading brand in professional-quality soldering equipment since 1945. In addition to its famous irons and soldering guns, Weller is also recognized as a leader in advanced electronic rework and repair equipment and irons for sophisticated industrial applications as well as numerous products for DIYers and hobbyists. From the manufacturer About Us Apex Tool Group (ATG) is one of the largest man­u­fac­tur­ers of pro­fes­sional hand and power tools in the world, serv­ing the in­dus­trial, ve­hi­cle ser­vice and as­sem­bly, aero­space, elec­tron­ics, con­struc­tion and se­ri­ous DIY mar­kets. Our port­fo­lio of over 30 in­no­v­a­tive brands in­cludes many cat­e­gory lead­ers, such as SATA, Gear­Wrench, Weller, Wiss, Lufkin, Cleco and Cres­cent. ATG also man­u­fac­tures se­lect, pre­mier pri­vate label me­chan­ics tools. Across the board, our tools stand for qual­ity, in­no­va­tion and value. Known for solv­ing seem­ingly im­pos­si­ble prob­lems, they are in­tu­itive and sim­ple to use, yet in­dis­pens­able. High order 1 oz Seeds (Approx 31234 Seeds) of Physocarpus opulifolius, East Cheap Retail Store I'm not sure how tight the tolerances of this product are, but mine arrived with the very tip looking like it had either been dropped, or just not ground to the correct dimensions. See picture for details. I was not expecting a needle-sharp tip, but at least a pencil-sharp one that is symmetrical.Definitely not worth returning over, as it will still work just fine for my purposes. But this may be relevant to people who rely on this tip for very precise work. This is my first conical tip, so please leave a comment if this is within the usual tolerance of such tips, and I will revise the 3-star rating. It always helps to buy the right tip for the right iron... I unfortunately did not. So my rating is based on the aesthetic quality of the tip.It looks fantastic. It's so nice looking, I may keep it and tell my kids it's the round that passed through the cow that we bought and I kept it for sentimental reasons.It only took me several hours to realize that it wasn't for the right iron. Please imagine me trying to continuously push this tip into my iron. That's not what happened, but it's a great visual. I tried twice, started taking my iron apart to see if there was some trick to it... and then put it back together in shame as I realized my mistake.It can be tricky to use, but it's much more precise than the stock tip that came with my weller station. If you're used to another tip, just start at a lower temperature, and work your way up to figure out the best position for your device.On the Weller WLC100 40-Watt Soldering Station:1- Be sure your new tip is installed2- To heat up the tip, turn on the station, and turn the knob to 2.5If you want to quick-heat the tip, you can set the knob to maximum for 10 seconds, and then turn to 2.53- I find 2.5 to be a good resting temperature, since it's below the temperature required to actually melt the solder.4- Once I'm ready to solder, I turn the knob up to 3.2-3.4. If I want to be precise, and melt very little solder, I'll set it to 3.2. If I have larger surface areas to heat up, I generally turn it up a little higher.Great tip. Before using, be sure to tin the tip. This is done by melting solder onto the tip, completely covering it. This prevents corrosion of the tip, and assists in heat transfer (trust me, it's a noticeable effect). I tin the tip a few times an hour (generally, when I'm resting it in its holder).Used to un-solder and replace the light bulbs and stepper motors in my Silverado instrument cluster. The tip had a fine enough point to do the job. It was much better than the tip that came with the Weller WLC 100 -40 watt soldering iron. Both made the job easier with no damage to the circuit board if you have some experience. Since this is the only job I have done with the tip so far I can't say how long it will last, but I can say this is the tip to use on that specific task. Bought this for a Weller WLC100 to use building electronic components. The wedge style tip that the Weller iron comes with is cumbersome for small tight spaces. I'm using lead free solder, perhaps that's the problem, but I found it very difficult to get the lead and area hot enough to get a nice solder joint. You'll see other reviews here complaining of the same issue. Larger component leads were worse. I switched back to the wedge and no problem.I have used Weller soldering stations for 60 years and have never run across such a difficult tip to use. Specs don't say what it is made out of, only that it is lead free. Doesn't heat well and DOESN'T TIN EASILY. Be sure you order tips made of COPPER with a hard coating that will clean and tin easily. This isn't it!I ordered this tip Jan 30, 2010... it arrived today, Feb 4, 2010. Very reasonable shipping time!As soon as I discovered it was in my mailbox, I rushed out to try it out... the old one easily came out, and the new one slid right now. Tightened it down.. then tried it out.With the bigger tip that the WLC100 came with, I had to use a heat setting of about 4, and it was a little bulky for soldering connections on circuit boards, etc.This new tip is absolutely fantastic... DAY AND NIGHT DIFFERENCE in the ease of use. If you need a more precise tip for circuit boards, etc... I highly recommend this tip, it makes soldering those delicate, tighter connections much, much easier.I was hesitant to order this tip because of another reviewer saying it did not fit his WLC100 station... but it does indeed fit perfectly and works great. I used a heat setting of 3 instead of 4 with this new tip, and it works perfectly.Recently, on my car alarm fob, the 'lock' function stopped working. all other functions still worked fine. When I investigated, it turned out that the micro switch had popped off the small circuit board...Well, car fobs are not cheap, so i thought I'll try and fix that..However, the contacts for the micro switch are smaller than micro (smaller than a pin head). I have soldering equipment, but nothing that small. So I ordered this to do the job..I performed well. it was the right size, and with a pin-size drop of flux, it took me about 10 mins to fix the fob. Our shop OFFers the best service our store lets you search thousands of online fashion stores at once, bringing together 17,000 of the world’s leading brands and retailers in one place. Tools Home Improvement => Welding Soldering => Soldering Brazing Equipment 1 oz Seeds (Approx 31234 Seeds) of Physocarpus opulifolius, East Weller ST7 ST Series Conical Solder Tip Hobbyist for WP25, WP30




Popular Tests

Test NameDetails
Whole Body PET CTView more
MRI BrainView more
Digital Chest X-RayView more
DEXAView more
Advance Care PackageView more
Senior Citizen Care PackageView more

Health Packages

Unmatched Care

Why Choose Us



High order 1 oz Seeds (Approx 31234 Seeds) of Physocarpus opulifolius, East Cheap Retail Store





Technology Partners

Health Bulletin and Articles

Tips to Sanitize & Disinfect House

Infection Prevention and Control

Health Tips to Detoxify Your Body

Immune Booster Foods

Online Reports